Step One

Soften your polymer clay, roll out 0.25 block of each shade to form a strip approximately 6 inches x 1 inch. Remember: if the strip is longer, the coil will be larger. Layer all three strips in any order then roll the stack of clay to form a coil starting from one of the narrow edges.

Step Two

Roll out the remaining 0.25 pack of silver clay, sprinkle the glitter on top and rub gently into the clay. Trim the edges to the same length of the coil and wrap around the outside.

Step Three

Press the outside of the coil of clay to form a square, and take a slice.

Step Four

First fold over one corner to touch the opposite corner and press firmly.